Product Description

Siemens 5SV3314-6RC RCCB – 40A, 2-Pole, 30mA, Type A, 240V

The Siemens 5SV3314-6RC is a SENTRON 5SV3 Residual Current Operated Circuit Breaker (RCCB) designed for residual-current protection in suitable single-phase AC electrical installations. It is a 2-pole / 1+N, Type A RCCB with a 40 A rated current and 30 mA rated residual operating current. Siemens identifies the corresponding 5SV3314-6 as an instantaneous 2-pole Type A RCCB, rated 40 A, 30 mA and 230 V AC.

The supplied India product designation specifies 240 V and 2MW, making this model suitable for compatible single-phase distribution boards, electrical panels and feeder applications.

Siemens 5SV3314-6RC Residual Current Circuit Breaker

The 5SV3314-6RC belongs to the Siemens SENTRON 5SV3 RCCB family. Its primary function is to monitor residual current and disconnect the protected circuit when the residual current reaches the specified operating threshold.

The 2-pole / 1+N configuration is intended for suitable single-phase systems where phase and neutral are incorporated into the residual-current protection arrangement.

Siemens currently lists the corresponding 5SV3314-6 as an active product under its SENTRON RCCB range.

40 A Rated Current

The RCCB has a rated current of 40 A.

This makes it suitable for compatible single-phase distribution circuits and feeders where a 40 A residual-current protection device is required.

The protected circuit should be designed so that the RCCB operates within its specified current, voltage and installation conditions.

30 mA Residual Current Sensitivity

The 5SV3314-6RC has a rated residual operating current of 30 mA.

When residual current reaches the specified operating threshold, the RCCB trips and disconnects the protected circuit.

The 30 mA sensitivity should be selected according to the complete electrical protection design and applicable installation requirements. Siemens confirms the 30 mA rated tripping fault current for the corresponding article.

Type A Residual Current Protection

The device is a Type A RCCB.

Compared with Type AC devices, Type A RCCBs are designed to detect suitable AC residual currents as well as pulsating DC residual-current components. This makes Type A protection useful for many installations containing modern electronic loads.

Potential applications can include:

• Electronic power supplies

• Rectifier-based equipment

• Automation equipment

• Variable-speed equipment

• Industrial machinery

• Modern commercial electrical equipment

The correct RCCB type should always be selected according to the residual-current characteristics of the connected equipment.

2-Pole / 1+N Configuration

The 5SV3314-6RC has 2 poles and is designed for 1+N single-phase applications.

This arrangement allows the phase and neutral conductors to be incorporated into the residual-current protection system.

Typical applications include:

• Single-phase distribution boards

• Commercial electrical panels

• Building electrical installations

• Sub-distribution circuits

• Equipment feeders

• Office electrical systems

• Industrial auxiliary circuits

240 V India Application / 230 V Siemens Rating

The supplied India product designation identifies the device as 240 V, 2MW.

Siemens' official technical data for the corresponding 5SV3314-6 specifies 230 V AC rated operating voltage.

For the SB Smart product page, the 240 V India-market designation can be retained, while the exact Siemens technical rating should be considered when selecting the device for an installation.

Instantaneous Operation

The 5SV3314-6RC is an instantaneous RCCB. Siemens specifies that the switching function is not short-time delayed.

This means the device responds without an intentionally introduced short-time delay when the specified residual-current threshold is reached.

10 kA Short-Circuit Current Rating

The corresponding Siemens 5SV3314-6 is specified with a 10 kA short-circuit current rating and a maximum permissible 63 A series fuse for short-circuit protection coordination.

The RCCB should nevertheless be coordinated with suitable upstream overcurrent protection and the prospective short-circuit conditions of the installation.

An RCCB primarily provides residual-current protection and should not be treated as a substitute for an MCB or MCCB for overload and short-circuit protection unless the complete protection arrangement specifically provides those functions.

Compact 2-Module Design

The India product designation specifies 2MW, meaning 2 module width.

The 2MW designation refers to the physical modular width and does not indicate a 2 MW power rating.

The Siemens Type A 1P+N range is designed in a compact 2-module format.

This format is suitable for:

• Modular distribution boards

• Consumer units

• Commercial electrical panels

• Sub-distribution boards

• Compact electrical enclosures

DIN-Rail Installation

The 5SV3314-6RC is designed for modular electrical installation.

Siemens identifies the corresponding device as size 1 according to DIN 43880 with 60 mm grid spacing.

It can therefore be integrated into suitable DIN-type distribution assemblies alongside compatible MCBs, busbars and other protection accessories.

IP20 Protection

Siemens specifies IP20 protection when the device is installed in a suitable distribution board with connected conductors.

The RCCB should therefore be installed inside an appropriate electrical enclosure or distribution assembly.

Residual Current Protection

Residual current occurs when part of the electrical current flows through an unintended path, such as leakage to earth.

The RCCB monitors the relevant current balance and disconnects the protected circuit when the residual current reaches the configured 30 mA threshold.

This provides an additional layer of residual-current protection within the overall electrical safety system.

Applications with Electronic Loads

The Type A characteristic makes the 5SV3314-6RC suitable for compatible installations where residual currents may include pulsating DC components.

Potential applications include:

• Industrial automation equipment

• Electronic control panels

• Rectifier-based machinery

• Variable-speed equipment

• Commercial electronic systems

• Modern machine installations

• Power-electronic loads

The actual suitability should be verified against the residual-current characteristics of the connected equipment.

Single-Phase Distribution Applications

The 5SV3314-6RC can be considered for compatible single-phase applications such as:

• Commercial distribution boards

• Building electrical panels

• Residential distribution systems

• Office electrical circuits

• Equipment supply circuits

• Single-phase feeder protection

• Industrial auxiliary circuits

The final protection application should be determined according to the electrical design and applicable regulations.

Protection Coordination

An RCCB should be coordinated with suitable overcurrent protection where required.

A typical protection arrangement can be:

Incoming Supply → MCB/MCCB → RCCB → Protected Load

The exact configuration depends on the electrical system, upstream protective device and applicable installation requirements.

The RCCB's residual-current function should be considered separately from overload and short-circuit protection.

Maintenance and Testing

RCCBs should be included in an appropriate electrical inspection and testing program.

The test function should be operated according to the manufacturer's instructions and applicable maintenance requirements to verify correct residual-current tripping.

Regular testing can help confirm that the protection mechanism remains operational.

Installation Considerations

Before selecting the 5SV3314-6RC, verify:

• Rated current: 40 A

• Residual-current sensitivity: 30 mA

• RCCB type: Type A

• Pole arrangement: 2-pole / 1+N

• System voltage compatibility

• Upstream overcurrent protection

• Available panel space: 2 module width

• Conductor size and termination

• Connected equipment leakage-current characteristics

• Applicable national electrical regulations

The RCCB type should always be selected according to the actual load and residual-current waveform.

Difference from Type AC 40 A, 30 mA Version

The 5SV4314-0RC is a 40 A, 2-pole, Type AC, 30 mA RCCB, whereas the 5SV3314-6RC is a 40 A, 2-pole, Type A, 30 mA RCCB.

Therefore:

5SV3314-6RC → Type A, 40 A, 30 mA

5SV4314-0RC → Type AC, 40 A, 30 mA

The main difference is the residual-current type.

Difference from Type A 25 A Version

The 5SV3312-6 is the corresponding 25 A, 2-pole, Type A, 30 mA device.

Therefore:

5SV3312-6 → 25 A

5SV3314-6RC → 40 A

Both use the Type A, 1P+N, 30 mA configuration. Siemens' selection data lists both current ratings in the same range.

Difference from Type A 63 A Version

The 5SV3316-6 is the corresponding 63 A, 2-pole, Type A, 30 mA device.

Therefore:

5SV3314-6RC → 40 A

5SV3316-6 → 63 A

The primary difference is rated current.

Difference from Type A 80 A Version

The 5SV3317-6 is the corresponding 80 A, 2-pole, Type A, 30 mA device.

Therefore:

5SV3314-6RC → 40 A

5SV3316-6 → 63 A

5SV3317-6 → 80 A

Difference from Type A 100 mA Version

The 5SV3414-6 is the corresponding 40 A, 2-pole, Type A, 100 mA device.

Therefore:

5SV3314-6RC → 40 A, 30 mA

5SV3414-6 → 40 A, 100 mA

The key difference is the residual-current operating threshold. Siemens' selection table distinguishes the Type A variants by residual-current sensitivity.

Difference from Type A 300 mA Version

The 5SV3614-6 is the corresponding 40 A, 2-pole, Type A, 300 mA device.

Therefore:

5SV3314-6RC → 40 A, 30 mA

5SV3414-6 → 40 A, 100 mA

5SV3614-6 → 40 A, 300 mA

Difference from 4-Pole Version

The 5SV3344-6RC is a 40 A, 4-pole / 3+N, Type A, 30 mA RCCB, while the 5SV3314-6RC is a 40 A, 2-pole / 1+N device.

Therefore:

5SV3314-6RC → 40 A, 2-pole / 1+N, Type A, 30 mA

5SV3344-6RC → 40 A, 4-pole / 3+N, Type A, 30 mA

The first is intended for suitable single-phase systems and the second for suitable three-phase-plus-neutral systems.

Suitable for Electrical Panel Builders and Industrial Buyers

The Siemens 5SV3314-6RC is relevant for:

• Electrical panel builders

• Industrial buyers

• Electrical contractors

• Commercial electrical contractors

• Facility-maintenance teams

• OEMs

• Machine builders

• Electrical distributors

• Industrial maintenance departments

• Electrical product dealers

For SB Smart, the product is positioned as a Siemens SENTRON 5SV3 Type A RCCB for 40 A single-phase residual-current protection.

Technical Specification

These specifications are based on Siemens' current technical data for 5SV3314-6.

Key Features

• Siemens SENTRON 5SV3 RCCB

• Article number 5SV3314-6RC

• 40 A rated current

• 2-pole / 1+N configuration

• 30 mA residual-current sensitivity

• Type A

• Instantaneous operation

• 230 V AC technical rating for the corresponding Siemens article

• 240 V India-market designation

• 2-module modular format

• 10 kA short-circuit current rating

• 2,000 V rated insulation voltage

• 60 mm grid spacing

• DIN modular installation

• Suitable for single-phase residual-current protection

• Suitable for installations with compatible electronic loads

Benefits

• Type A protection: Suitable where residual currents may include pulsating DC components.

• 40 A rating: Suitable for compatible higher-current single-phase circuits.

• 30 mA sensitivity: Provides residual-current protection at the specified operating threshold.

• 2-pole / 1+N design: Suitable for phase-and-neutral single-phase systems.

• Instantaneous operation: Provides residual-current disconnection without intentional short-time delay.

• Compact 2-module format: Helps optimize space in modular distribution boards.

• DIN modular installation: Supports convenient integration into standard electrical protection assemblies.

• 10 kA short-circuit rating: Supports coordination with suitable upstream protective equipment.

• SENTRON 5SV3 platform: Provides a Siemens solution for Type A residual-current protection.

Why Choose Siemens 5SV3314-6RC?

The Siemens 5SV3314-6RC is a 40 A, 2-pole / 1+N, Type A RCCB with 30 mA residual-current sensitivity, designed for suitable single-phase AC electrical installations. Siemens' current Industry Mall and data sheet identify the corresponding 5SV3314-6 as an active, instantaneous 2-pole Type A RCCB with 40 A rated current, 30 mA residual current and 230 V AC rated voltage.

Its Type A characteristic makes it particularly suitable for compatible installations where residual currents may contain pulsating DC components.

For SB Smart, this product is best presented as a Siemens SENTRON 5SV3 Type A residual-current circuit breaker for 40 A single-phase electrical protection across India.

Delivery Across India

SB Smart supplies Siemens SENTRON/Betagard RCCBs and industrial electrical protection products across Faridabad, Gurgaon/Gurugram, Delhi NCR, Haryana, Noida, Punjab, Mumbai and other major Indian cities.

Major delivery locations include:

• Faridabad

• Delhi

• Gurgaon/Gurugram

• Delhi NCR

• Noida

• Greater Noida

• Haryana

• Punjab

• Mumbai

• Pune

• Ahmedabad

• Bengaluru

• Hyderabad

• Chennai

• Kolkata

• Jaipur

• Chandigarh

• Lucknow

• Indore

• Surat

• Vadodara

• Nagpur

• Coimbatore

• And other major cities across India

Frequently Asked Questions

1. What is Siemens 5SV3314-6RC?

The 5SV3314-6RC is a Siemens SENTRON 5SV3 residual-current operated circuit breaker rated at 40 A, with 2 poles / 1+N, 30 mA residual-current sensitivity and Type A characteristics.

2. How many poles does it have?

It has 2 poles, configured for 1+N single-phase applications.

3. What is the rated current?

The rated current is 40 A.

4. What is the residual-current sensitivity?

The rated residual operating current is 30 mA.

5. What type of RCCB is it?

It is a Type A RCCB, suitable for compatible AC residual currents and pulsating DC residual-current components.

6. Is it instantaneous?

Yes. Siemens identifies the corresponding 5SV3314-6 as instantaneous, without short-time delayed switching.

7. What is the voltage rating?

Siemens' current technical data specifies 230 V AC for the corresponding 5SV3314-6 article, while the supplied India description uses 240 V.

8. What does 2MW mean?

2MW means 2 module width in the modular installation format. It does not mean a 2 MW power rating.

9. What is the short-circuit current rating?

The specified short-circuit current rating is 10 kA.

10. What is the difference between 5SV3314-6RC and 5SV4314-0RC?

5SV3314-6RC: 40 A, 2-pole / 1+N, Type A, 30 mA.

5SV4314-0RC: 40 A, 2-pole / 1+N, Type AC, 30 mA.

11. What is the difference between 5SV3314-6RC and 5SV3414-6?

5SV3314-6RC: 40 A, Type A, 30 mA.

5SV3414-6: 40 A, Type A, 100 mA.

12. Where can I buy Siemens 5SV3314-6RC in India?

SB Smart supplies Siemens SENTRON 5SV3 Type A RCCBs and industrial electrical protection products in India for panel builders, electrical contractors, industrial buyers, maintenance teams and distribution applications.